Post by Angie on Apr 11, 2006 14:59:38 GMT -8
Dailies 04.07.06
GS01
Angie
Mikes hair is looking green
Take off 25 percent of the fog
Take mikes bloom down a bit
Final CBB
Matchlighting
Kelli
make sure your blacks match the blacks in the plate close to where the cg object sits.
add another bounce to take some of the dark side up a bit
Use the plate as the shadow, not the cg shadow.
Spec is a little hot, just a bit blown out. You may need to have it fall off in to the penumbra of the spot.
Angie
haze and solid out the smoke light
cc the smoke to the orange
perhaps nudge shadow over.
Leif
get shadows in place
light direction - no bounce, just absolute lighting. One light no fill.
try to get the lense focal length correct.
Ivy
Perspective is off. Check the matchmove.
half the bench has a bit too much cyan in it.
Need to get the keys and the fills balanced.
Yuying
You could add the ball to the already present shadow about half in.
Or you could place it in the more difficult spot.
Erin
Loose the reflection map on the side
shadow is clip
Ball looks a bit soft, make it sharp
make the shadow sharp
Color is a bit yellowish, make it a tad blue. cool it off some.
Mike
May need to recreate some bounce from the floor.
make sure his fill has some blue light so he's not completely black on the one side.
UFO
Yuying
The plate is pretty overexposed, so this would be tough. You could do it. you can do it if you want.
You probably should use the part of the plate that does not have a zoom.
Kelli
The plate you have could be used to sneak a ufo in.
Melissa
Plate is a little planned out. As if your expecting a UFO.
GS01
Angie
Mikes hair is looking green
Take off 25 percent of the fog
Take mikes bloom down a bit
Final CBB
Matchlighting
Kelli
make sure your blacks match the blacks in the plate close to where the cg object sits.
add another bounce to take some of the dark side up a bit
Use the plate as the shadow, not the cg shadow.
Spec is a little hot, just a bit blown out. You may need to have it fall off in to the penumbra of the spot.
Angie
haze and solid out the smoke light
cc the smoke to the orange
perhaps nudge shadow over.
Leif
get shadows in place
light direction - no bounce, just absolute lighting. One light no fill.
try to get the lense focal length correct.
Ivy
Perspective is off. Check the matchmove.
half the bench has a bit too much cyan in it.
Need to get the keys and the fills balanced.
Yuying
You could add the ball to the already present shadow about half in.
Or you could place it in the more difficult spot.
Erin
Loose the reflection map on the side
shadow is clip
Ball looks a bit soft, make it sharp
make the shadow sharp
Color is a bit yellowish, make it a tad blue. cool it off some.
Mike
May need to recreate some bounce from the floor.
make sure his fill has some blue light so he's not completely black on the one side.
UFO
Yuying
The plate is pretty overexposed, so this would be tough. You could do it. you can do it if you want.
You probably should use the part of the plate that does not have a zoom.
Kelli
The plate you have could be used to sneak a ufo in.
Melissa
Plate is a little planned out. As if your expecting a UFO.